Description
| FEATURES |
|
| SPECIFICATIONS | |||||||||
| Model Number | Display Color | Number of Stations / Actuators | Overall Width | Overall Height / Thickness | Mounting Hole Cutout (Diameter) | DC Voltage | Fuse Size Power Input (1 Actuator per Tab) | Fuse Size AUX Terminal (MUST CONNECT) | |
| SLC-11 | Black | 1 or 2 Stations / 1 or 2 Actuators/tab | 3.0" / 77mm | 3.0" (77mm) / 437" (11mm) | 2.25" (57mm) to 2.5" (64mm) | 12/24 | 12vdc = 15 or 20 amp 24 vdc = 10amp |
1 to 2 amp | |
| SLC WIRING and DIMENSIONS |
| SLC PROGRAMMING | ||||||
| Program Mode Sequence | ||||||
| Setting | Enter | Change Setting | Exit and Save | Range | Default | Program Details |
| Timing | Port Bow Down | Press and hold Stbd. Bow Up/Down | Port Bow Up | 4 - 12 seconds | 8 sec. | 8 LED's = 8 second actuator 4 LED's = 4 second actuator |
| Swap LEDs | Starboard Bow Down | Stbd. Bow Up/Down | Port Bow Up | LEDs opposite or same side as button press | LEDs opposite | 1 LED each side = LEDs opposite button press / 8 LEDS each side = same side |
| Remember last tab setting | Port Bow Up | Stbd. Bow Up/Down | Port Bow Up | Standard retract / Remember last tab setting | Standard | 8 LEDs each side = Standard / 1 LED each side = Remember last tab setting |
| Disable Auto Tab Retract | All Up and All Down Simultaneously for 2 seconds or longer | Stbd. Bow Up/Down | Port Bow Up | Enable / Disable | Enable | 1 LED each side = Auto Tab Retract Enable / 8 LEDs each side = Auto Tab Retract Disable |
Enter, Adjust and Exit Program Mode:
- Before entering program mode, 12vdc or 24vdc must be applied to Oval main power
- Power to AUX terminal must be OFF (Aux is typically connected to ignition key switch or aux switch)
- Press and hold button noted in Programming chart under column “Enter” for more than 2 seconds while switching the Aux terminal switch to ON at the same time
- Release the “Enter” button and press “STBD BOW UP or DOWN” button to change the value
- Press and hold “PORT BOW UP” for more than 2 seconds to exit program mode